Filter on:
    Oosterveldsingel 3, 7558 PJ Hengelo

    Enquiry

    View modus:

    KTR BENELUX

    company-image

    Rating: Specifically seaworthy!
    KTR couplings are on the high seas all over the world and are used in various applications for marine technology: in main and auxiliary drives and every kind of deck equipment. Nearly all our couplings can be certified in accordance with the strict standards of Germanischer Lloyd (GL), American Bureau of Shipping (ABS), Det Norske
    Veritas (DNV) and Bureau Veritas (BV) or any other classification bureau and are approved to DIN EN 10204 standard.

    Full manoeuvrability for steering drives
    Bow thrusters, rear rudders and transverse rudders require couplings, that dampen torsional vibrations, such as ROTEX®. Thanks to its compact design it is easy to assemble and operate. This type of coupling functions without any maintenance.
    ROTEX® compensates for axial, radial and angular displacements, increasing the service life of the entire drive system. Its damping effect can be controlled by the Shore hardness of the elastomer spider: a hard elastomer is used for high torques, a softer one is used for higher damping effects.
    You can keep vessels, whose rudder have a shaft diameter exceeding 600mm, on course by using the positive-locking shaft-hub-connection CLAMPEX® clamping sets.

    Power and safety on board
    Wherever there is anything that needs to be moved whilst at sea, KTR couplings are involved. On IC-engines driven hydraulic power packs the flange couplings BoWex®-ELASTIC and BoWex® FLE-PA are often used, on pumps and compressors ROTEX® or POLY-NORM® or the torsional stiff steel lamina couplings RADEX®-N or RIGIFLEX®-N and on winches and cranes ROTEX® couplings and KTR-STOP high-power brake systems.
    KTR-STOP brakes are also used in lock and turn systems on the main shaft to position and/or hold in position the propeller.

    Components for reliable on-board hydraulics
    ROTEX is used in numerous hydraulic power packs on board as well inside the vessel. Its easy plug-in procedure is of bene-fit during assembly used in conjunction with a KTR Bell housing. New KTR Bell housings produced from cast iron are suitable for marine applications, withstanding the high loads and aggressive seawater in the long term.
    Additionally we are pleased to supply all other hydraulic components such as oil tanks etc. Everything is available from one single source and is fully compatible for such harsh working environments.

    Perfect thermo management for marine hydraulics
    KTR offers oil-air as well as oil-water coolers being resistant to aggressive seawater. The compact OAC oil-air coolers for high-power cooling of hydraulic fluids and lubricants are coated with a corrosion-resistant KTL dipping paint for marine applications. They protect the cooler reliably against oxidation, even in the area between the laminas which is difficult to enter. In addition electric motors of protection class IP 56 are used. Even higher are the demands on TAK/T shell and tube oil-water coolers cooling oil with highly aggressive salt water. For these applications we use permanently seawater resistant materials

    Success is a ‘question of selection’
    KTR also offer additional support via our online selection program for couplings, hydraulic components and oil-coolers. For further information please order our brochure ‘Couplings for marine technology’ or our Company Catalogue. Both are also available as a PDF download on the KTR website. Alternatively please contact us directly. KTR continuously develops new solutions for marine technology. Simply contact us and we will design the right coupling!

    KTR BENELUX

    company-logo

    Rating: Specifically seaworthy!
    KTR couplings are on the high seas all over the world and are used in various applications for marine technology: in main and auxiliary drives and every kind of deck equipment. Nearly all our couplings can be certified in accordance with the strict standards of Germanischer Lloyd (GL), American Bureau of Shipping (ABS), Det Norske
    Veritas (DNV) and Bureau Veritas (BV) or any other classification bureau and are approved to DIN EN 10204 standard.

    Full manoeuvrability for steering drives
    Bow thrusters, rear rudders and transverse rudders require couplings, that dampen torsional vibrations, such as ROTEX®. Thanks to its compact design it is easy to assemble and operate. This type of coupling functions without any maintenance.
    ROTEX® compensates for axial, radial and angular displacements, increasing the service life of the entire drive system. Its damping effect can be controlled by the Shore hardness of the elastomer spider: a hard elastomer is used for high torques, a softer one is used for higher damping effects.
    You can keep vessels, whose rudder have a shaft diameter exceeding 600mm, on course by using the positive-locking shaft-hub-connection CLAMPEX® clamping sets.

    Power and safety on board
    Wherever there is anything that needs to be moved whilst at sea, KTR couplings are involved. On IC-engines driven hydraulic power packs the flange couplings BoWex®-ELASTIC and BoWex® FLE-PA are often used, on pumps and compressors ROTEX® or POLY-NORM® or the torsional stiff steel lamina couplings RADEX®-N or RIGIFLEX®-N and on winches and cranes ROTEX® couplings and KTR-STOP high-power brake systems.
    KTR-STOP brakes are also used in lock and turn systems on the main shaft to position and/or hold in position the propeller.

    Components for reliable on-board hydraulics
    ROTEX is used in numerous hydraulic power packs on board as well inside the vessel. Its easy plug-in procedure is of bene-fit during assembly used in conjunction with a KTR Bell housing. New KTR Bell housings produced from cast iron are suitable for marine applications, withstanding the high loads and aggressive seawater in the long term.
    Additionally we are pleased to supply all other hydraulic components such as oil tanks etc. Everything is available from one single source and is fully compatible for such harsh working environments.

    Perfect thermo management for marine hydraulics
    KTR offers oil-air as well as oil-water coolers being resistant to aggressive seawater. The compact OAC oil-air coolers for high-power cooling of hydraulic fluids and lubricants are coated with a corrosion-resistant KTL dipping paint for marine applications. They protect the cooler reliably against oxidation, even in the area between the laminas which is difficult to enter. In addition electric motors of protection class IP 56 are used. Even higher are the demands on TAK/T shell and tube oil-water coolers cooling oil with highly aggressive salt water. For these applications we use permanently seawater resistant materials

    Success is a ‘question of selection’
    KTR also offer additional support via our online selection program for couplings, hydraulic components and oil-coolers. For further information please order our brochure ‘Couplings for marine technology’ or our Company Catalogue. Both are also available as a PDF download on the KTR website. Alternatively please contact us directly. KTR continuously develops new solutions for marine technology. Simply contact us and we will design the right coupling!

    Our services

    These are my services!

    Video

    There is no information at this moment.

    Speciality

    There is no information at this moment.

    Projects

    There is no information at this moment.

    Contact information

    contact-icon +31 (0)74 255 3680
    +31 (0)74 255 3689